Description
The set AJ6-800 Basic AirJib consists of the copter AF6-800 in combination with the CM-M gimbal in its 2-axes version. This configuration is very well suited for beginners just starting to explore the world of aerial photography.
For this set we decided on the simplest version CM-M-G2S of our gimbal, which is a 2-axes gimbal with a motor for the pitch axis (single pitch drive). This camera mount is ideal for lightweight cameras such as a Sony Nex5/7 or a Blackmagic Pocket.
Since the gimbal has only two axes the copter has been fitted with the permanently attached landing gear AF6-800-LGC.
The damping system used is our AF6-800-DPC.
One advantage to a copter with a 2-axes gimbal is that its operation ordinarily only requires one person. However, it is recommended that the pilot has the option of swiveling the camera vertically up- or downwards via his own channel.
An upgrade to the AJ6-800 Advanced AirJib set is possible at any time.
The Basic AirJib consists of the following components.
- AF6-800-FRM (base frame)
- AF6-800-PDB (power distribution board)
- AF6-800-LGC (landing gear)
- AF6-800-BHC (battery holder)
- AF6-800-DPC (damping system)
- AF6-800-GMP (gimbal mounting plate)
- CM-M-G2S (gimbal G2S)
- CM-M-GAA (gimbal adapter type A)
- CM-M-COB (controller holder type B)
- CM-M-CAA (camera holder type A)
Important information
Basecam Alexmos brushless gimbal electronics is not included!
Technical Specifications
Weight: 1411g
Dimensions (L x B x H): 846 x 846 x 376mm
Delivery Contents
1 piece AF6-800-FRM (base frame)
1 piece AF6-800-PDB (power distribution board)
1 piece AF6-800-LGC (landing gear)
1 piece AF6-800-BHC (battery holder)
1 piece AF6-800-DPC (damping system)
1 piece AF6-800-GMP (gimbal mounting plate)
1 piece CM-M-G2S (gimbal G2S)
1 piece CM-M-GAA (gimbal adapter type A)
1 piece CM-M-COB (controller holder type B)
1 piece CM-M-CAA (camera holder type A)
Recommended Drives
T-Motor MN3110 KV470 with T-Motor 15x5.0" CFK propeller and T-Motor ESC T40A, 2 4S LiPo 5000mAh
T-Motor MN3508 KV580 with T-Motor 14x4.8" CFK propeller and T-Motor ESC T40A, 2 4S LiPo 5000mAh
T-Motor MN3510 KV700 with T-Motor 13x4.4" CFK propeller and T-Motor ESC T40A, 2 4S LiPo 5000mAh
Reviews (0)
Related Products
-
AF6-800 Base frame
The base frame is the central component of our hexacopter AF6-800. Since its diagonal moto..
460.00€ Ex Tax: 383.33€
-
AF6-800 Basic AirFrame
As part of this set we offer a copter that already possesses all of the co..
908.00€ Ex Tax: 756.67€
-
AF6-800 Landing gear
The landing gear AF6-800-LGC will be attached permanently to the underside of the copter a..
238.00€ Ex Tax: 198.33€
-
AF6-800 Universal mounting plate
The universal mounting plate can be attached directly to the underside of the copter or to..
26.00€ Ex Tax: 21.67€
-
AF6-800 Damping system
Using a damping system allows the vibrations made by the copter's drive motors to mostly b..
60.00€ Ex Tax: 50.00€
-
AF6-800 Battery holder
The battery holder will contain the rechargeable batteries (LiPos) that should be attached..
20.00€ Ex Tax: 16.67€
-
AF6-800 Mounting frame
The mounting frame can be attached directly to the underside of the copter or to the two o..
68.00€ Ex Tax: 56.67€
-
AF6-800 Gimbal mounting plate
The gimbal mounting plate can be attached directly to the underside of the copter or to on..
24.00€ Ex Tax: 20.00€
-
AF6-800 Damping system
Using a damping system allows the vibrations made by the copter's drive motors to mostly b..
60.00€ Ex Tax: 50.00€
-
AF6-800 Landing gear
The landing gear AF6-800-LGG will be attached directly to the gimbal CM-M and will follow ..
258.00€ Ex Tax: 215.00€
-
AF6-800 Battery holder
The battery holder will contain the rechargeable batteries (LiPos) that should ideally be ..
22.00€ Ex Tax: 18.33€
-
AF6-800 Power distribution board
When employing several motors at full capacity significant currents are created that can m..
60.00€ Ex Tax: 50.00€
-
AJ6-800 Advanced AirJib
The set AJ6-800 Advanced AirJib consists of the copter AF6-800 in combinat..
1,522.00€ Ex Tax: 1,268.33€