Description
The mounting frame can be attached directly to the underside of the copter or to the two optionally available dampers and can be used to mount a variety of loads. The mounting frame presents an alternative option to the universal mounting plate AF6-800-UMP.
The two pipes with a length of 240mm and a diameter of 12mm are arranged at 124mm distance from one another.
We recommend our product GPI-BC12 should you intend to mount the load by means of pipe clamps.
Both pipes as well as both cross braces are made of high-strength CFRP.
Technical Specifications
Weight: 70g
Dimensions (L x B x H): 248 x 152 x 24mm
Delivery Contents
1 piece mounting frame
1 set assembly material
Reviews (0)
Related Products
-
AF6-800 Landing gear
The landing gear AF6-800-LGG will be attached directly to the gimbal CM-M and will follow ..
258.00€ Ex Tax: 215.00€
-
AF6-800 Damping system
Using a damping system allows the vibrations made by the copter's drive motors to mostly b..
60.00€ Ex Tax: 50.00€
-
AF6-800 Base frame
The base frame is the central component of our hexacopter AF6-800. Since its diagonal moto..
460.00€ Ex Tax: 383.33€
-
AF6-800 Universal mounting plate
The universal mounting plate can be attached directly to the underside of the copter or to..
26.00€ Ex Tax: 21.67€
-
AF6-800 Power distribution board
When employing several motors at full capacity significant currents are created that can m..
60.00€ Ex Tax: 50.00€
-
AF6-800 Basic AirFrame
As part of this set we offer a copter that already possesses all of the co..
908.00€ Ex Tax: 756.67€
-
AF6-800 Gimbal mounting plate
The gimbal mounting plate can be attached directly to the underside of the copter or to on..
24.00€ Ex Tax: 20.00€
-
AJ6-800 Advanced AirJib
The set AJ6-800 Advanced AirJib consists of the copter AF6-800 in combinat..
1,522.00€ Ex Tax: 1,268.33€
-
AF6-800 Landing gear
The landing gear AF6-800-LGC will be attached permanently to the underside of the copter a..
238.00€ Ex Tax: 198.33€
-
AF6-800 Damping system
Using a damping system allows the vibrations made by the copter's drive motors to mostly b..
60.00€ Ex Tax: 50.00€
-
AF6-800 Battery holder
The battery holder will contain the rechargeable batteries (LiPos) that should ideally be ..
22.00€ Ex Tax: 18.33€
-
AF6-800 Battery holder
The battery holder will contain the rechargeable batteries (LiPos) that should be attached..
20.00€ Ex Tax: 16.67€
-
AJ6-800 Basic AirJib
The set AJ6-800 Basic AirJib consists of the copter AF6-800 in combination..
1,364.00€ Ex Tax: 1,136.67€