Description
As part of this set we offer a copter that already possesses all of the components in its initial configuration that are necessary for a stable support system to transport various payloads.
The copter can be expanded at any time to, in conjunction with a gimbal of the CM-M make, later be operated as an AirJib (AJ6-800-BAJ, AJ6-800-AAJ).
We recommend this set if you would first like to familiarize yourself with the AF6-800 copter and then decide at a later time which version of the CM-M gimbal is most suitable to your needs.
The basic air frame comes with the damping system AF6-800-DPC and the mounting frame AF6-800-MFR. By employing the optionally available pipe clamps GPI-BC12 and a suitable adapter you can attach for example a gimbal made by a third party provider to it.
Alternatively you can also install the universal mounting plate AF6-800-UMP on the damping system, which is not included in the delivery contents.
The set consists of the following components.
- AF6-800-FRM (base frame)
- AF6-800-PDB (power distribution plate)
- AF6-800-LGC (landing gear)
- AF6-800-BHC (battery holder)
- AF6-800-DPC (damping system)
- AF6-800-MFR (mounting frame)
Technical Specifications
Weight: 862g
Dimensions (L x B x H): 846 x 846 x 380mm
Delivery Contents
1 piece AF6-800-FRM (base frame)
1 piece AF6-800-PDB (power distribution plate)
1 piece AF6-800-LGC (landing gear)
1 piece AF6-800-BHC (battery holder)
1 piece AF6-800-DPC (damping system)
1 piece AF6-800-MFR (mounting frame)
1 set assembly material
Recommended Drives
T-Motor MN3110 KV470 with T-Motor 15x5.0" CFK propeller and T-Motor ESC T40A, 2 4S LiPo 5000mAh
T-Motor MN3508 KV580 with T-Motor 14x4.8" CFK propeller and T-Motor ESC T40A, 2 4S LiPo 5000mAh
T-Motor MN3510 KV700 with T-Motor 13x4.4" CFK propeller and T-Motor ESC T40A, 2 4S LiPo 5000mAh
Reviews (0)
Related Products
-
AJ6-800 Basic AirJib
The set AJ6-800 Basic AirJib consists of the copter AF6-800 in combination..
1,364.00€ Ex Tax: 1,136.67€
-
AF6-800 Damping system
Using a damping system allows the vibrations made by the copter's drive motors to mostly b..
60.00€ Ex Tax: 50.00€
-
AF6-800 Damping system
Using a damping system allows the vibrations made by the copter's drive motors to mostly b..
60.00€ Ex Tax: 50.00€
-
AF6-800 Gimbal mounting plate
The gimbal mounting plate can be attached directly to the underside of the copter or to on..
24.00€ Ex Tax: 20.00€
-
AF6-800 Power distribution board
When employing several motors at full capacity significant currents are created that can m..
60.00€ Ex Tax: 50.00€
-
AF6-800 Landing gear
The landing gear AF6-800-LGC will be attached permanently to the underside of the copter a..
238.00€ Ex Tax: 198.33€
-
AF6-800 Universal mounting plate
The universal mounting plate can be attached directly to the underside of the copter or to..
26.00€ Ex Tax: 21.67€
-
AF6-800 Base frame
The base frame is the central component of our hexacopter AF6-800. Since its diagonal moto..
460.00€ Ex Tax: 383.33€
-
AF6-800 Battery holder
The battery holder will contain the rechargeable batteries (LiPos) that should be attached..
20.00€ Ex Tax: 16.67€
-
AF6-800 Landing gear
The landing gear AF6-800-LGG will be attached directly to the gimbal CM-M and will follow ..
258.00€ Ex Tax: 215.00€
-
AJ6-800 Advanced AirJib
The set AJ6-800 Advanced AirJib consists of the copter AF6-800 in combinat..
1,522.00€ Ex Tax: 1,268.33€
-
AF6-800 Mounting frame
The mounting frame can be attached directly to the underside of the copter or to the two o..
68.00€ Ex Tax: 56.67€
-
AF6-800 Battery holder
The battery holder will contain the rechargeable batteries (LiPos) that should ideally be ..
22.00€ Ex Tax: 18.33€