AirFrame AF6-800

The AirFrame AF6-800 is a stable hexacopter with a diagonal rotor spindle distance of 800mm. This model is designed for a maximum take-off weight (TOW) of around 6kg.

In combination with the gimbal CameraMount CM-M we were able to design a modular complete system that can be tailored to our customers' specific requirements if desired.

One of our main points of focus was the construction of an extremely lightweight yet simultaneously stable multicopter with a take-off weight of under 5kg even in combination with a gimbal of maximum configuration. The reason for this was to gain operating approval from the Austrian aviation safety authorities Austro Control for flights in densely populated areas (Category C). For further information please refer to section TOW under 5kg.

The centerpiece of the Airframe AF-M-800 is made up of the frame (AF6-800-FRM) consisting of both centerplates, the cover panel, the arms and the motor mounts.

This configuration in combination with a securely attached landing gear on the copter (AF6-800-LGC), two battery holders (AF6-800-BHC), a damping system (AF6-800-DPC) and a plate (AF6-800-UMP) or frame (AF6-800-MFR) for the fastening of cameras and other equipment thereby represents our basic or respectively beginners' set.

We recommend the usage of our power distribution board (AF6-800-PDB) that can be affixed between both centerplates. Two copper plates of 1.5mm each with altogether 9 terminal contacts allow for an ideal management of the power supply.

We offer three different suspension systems for the fastening of the payload and all three options can be purchased either damped or undamped.

More or fewer damping elements can be used according to weight and inertia of the carried load and the damping element can additionally be affixed either on the inner or outer side.

The base plate and attachment frame are intended to also mount gimbals and other payloads by third-party providers.

In addition to this we also offer an attachment plate on which our gimbal CameraMount CM-M can be installed.

The copter AirFrame AF6-800 in combination with the gimbal CameraMount CM-M makes up the complete system AirJib AJ6-800.