The camera mount CM-M-G3D is a 3-axes gimbal with two motor in the horizontal pitch axis (double pitch drive).
In accordance with the modular concept this gimbal in its basic form consists essentially only of the frame and the drive motors and has to be supplemented by several components.
This offers our clients the option of customizing the camera mount to suit their exact wishes.
Suitable for installation on a copter and a camera tripod as well as manual operation. If the camera you are using is heavier or if it is not ideally positioned in relation to the center of gravity you will need two motors to support it. Once installed on the copter the gimbal can be moved completely independently. Different modes allow for handling by one- or two-man operation. Mounted on the manual operation device the third axis allows for a follow-mode in which the camera mount adjusts itself more or less quickly or damped to the movements of the manual operation. Even though a gimbal of this type uses four motors the complete take-off weight of copter and gimbal in maximum configuration still falls below 5kg. (please refer to AirJib AJ6-800)
Adjustments to this gimbal can be made in all axes to match it perfectly to the camera used.
We also recommend the use of the following products from our CM-M line.
- gimbal adapter CM-M-GAA or CM-M-GAB to be mounted on a copter of the AF6-800 make or the hand frame CM-M-HFR
- camera holder CM-M-CAA or CM-M-CAB to mount the camera
- controller holder CM-M-COA or CM-M-COB for fitting of the gimbal controller
Basecam Alexmos brushless gimbal electronics is not included!
Dimensions (L x B x H): 190 x 224 x 245mm
1 piece gimbal G3D
1 set assembly material