Using a damping system allows the vibrations made by the copter's drive motors to mostly be absorbed without being transferred to gimbal or camera.
By adjusting the damping system to the combined weight of both gimbal and camera you can therefore entirely eliminate the disruptive rolling shutter effect.
These adjustments can take place by adding or removing damping elements. Four elements at the least and twelve elements at the most can be applied.
Another possibility for adaption is presented by the option of pointing the damping elements inwards or outwards.
The damping system will be attached directly to underside of the copter. The modular concept allows for a choice between the universal mounting plate AF6-800-UMP, the gimbal mounting plate AF6-800-GMP and the mounting frame AF6-800-MFR when considering what to attach to the damping elements.
The damping system is designed in such a way that the damping elements are subjected to compression.
All plates are made of high-strength CFRP. The damping elements are made of rubber.
Dimensions (L x B x H): 126 x 113 x 24mm (when installed)
1 piece damping system (2 units damping elements)
1 set assembly material