The battery holder will contain the rechargeable batteries (LiPos) that should be attached to the underside of the copter on the centerplate, ideally with double-sided Velcro tape.
Please note that due to their heaviness the batteries must always be arranged symmetrically.
The standard configuration contains two battery holders. However, if you would like to achieve longest possible flight operation with a smaller payload you may also attach two additional battery holders to the arms of the copter.
Spacers ensure that the Velcro strap can be passed between the mounting plate and the fastening clamp.
Self-adhesive foam rubber parts that have been cut to size and inserted between battery and mounting plate securely hold the LiPos in place.
The plates are made of high-strength CFRP.
Weight: 12g (2 units)
Dimensions (L x B x H): 106 x 44 x 8mm
2 pieces battery holders
1 set assembly material